Production / Professional leading manufacturer of Neoprene Sheet, Neoprene Support, Health Support, Bike Wear, Sports Wear, Rubber Neoprene Sheet, Cycling Clothes, Cycle Wear...etc.

Nylon, fabric woven fabric dyeing:

One of NEOTEX's satellite plants, the dyeing plant has a complete production line, including color mixing machines, dyeing machines, fabric spreaders and fabric QC machines.

Synthetic fibers, polyester fibers, and nylon fabrics are also produced.

The process is as follows: spinning → textile → dyeing cylinder → forming cloth

NEOPRENE, Satellite factory:

One of NEOTEX's satellite plants, which has a production line for processing sponge materials, including a profiler and a cutting machine.

The sponge is cut to a fixed thickness so that it can be closely attached to the fabric, and can be easily processed into various daily necessities, sports protectors, anti-collision materials and the like.

The process is as follows: NEOPRENE cutting → laminating fabric → cutting with a die → cutting piece

Machine introduction:

Cutting machine

The piece of sponge is processed by a cutter to divide the product into pieces and then to be processed later.

Laminating machine

This machine can cut the thickness of the sponge and make the thickness of the sponge reach the thickness required by customers.

Technology Introduction:

2l413D CNC Stereo Cutting Technology:
NEOTEX's sub-satellite factory has 3DCNC three-dimensional cutting technology. The advantages of this technology are "free mold" and "quick proofing" and "integral molding". This 3D computer stereo cutting machine is used to replace traditional manual washing machine, traditional manual washing. When washing EVA foam in bed, the artificial cutting arc angle depends on the skillful angle of the staff to turn the angle. The disadvantage is that the artificial non-mechanical, personal hand difference has caused the difference in the finished product. At the washing speed of 12000 rpm, the angle of each product They all have the same angle and can accurately meet the quality requirements of customers.

Avoid open mold
In the case of general customer proofing, if it takes more time and money to develop the die and the forming die, this technology can be directly based on the sketch provided by the customer, and after the internal professional, after the precise drawing operation, the cutting machine can firstly put the product into the product. The appearance is cut out, and the inner lines are ground again, and finally the periphery is ground to the required arc angle. It is convenient to provide the quantity in small amount proofing, and then you can discuss the finished product and the customer according to the finished product, and then modify the supplementary place.

One-piece molding technology
The traditional sponge processing is first cutting the sponge → rolling die forming → artificial arc angle → pressure embossing road
This technology can be matched with the cutting knives of the machine. After the program is set, the products are formed by automation, and the professionals are assisted by the side, which is of great help to the processing speed.

NEOPRENE Sewing equipment：

NEOTEX is committed to producing high-quality NEOPRENE products and is a leading supplier with a good reputation - sewing staff with more than 20 years of experience, as well as suitable sewing machines for the products to achieve aesthetics and durability.

Fabric sewing machines

• Overlock Sewing Machine* 40
• Zig-zag stitching m/c* 70
• Zigzag machine * 30
• Computer Sewing Machine * 5
• Interlock machine * 3
• Patterned tacking machine or bartacking machine * 4
• Blind-stitch machine* 4
• Serging sewing machine * 6
• Lock - stitch machine * 6

Quality control（QC）

NEOTEX properly inspects each product according to the SOP through packaging production lines and metal detectors, so as to prevent customers from being defective and potentially jeopardizing the metal retention of the human body, so that customers can trust and trust.